| AA - AirsoftArea.ch http://www.airsoftarea.ch/phpbb3/ |
|
| Zylinder vs. Lauflänge / Länge des Laufs pro Gun http://www.airsoftarea.ch/phpbb3/viewtopic.php?f=11&t=19113 |
Seite 1 von 1 |
| Autor: | alfa [ 16/1/2012, 08:24 ] |
| Betreff des Beitrags: | Zylinder vs. Lauflänge / Länge des Laufs pro Gun |
Musste div. Sachen googeln, dieser Post von JackBauer in einem anderen Forum hat alle meine Fragen beantwortet: CYLINDER: (cylinderVolume-to-barrel-ratio) 2 is to 1 (standard) Marui Stock Cylinders: 1. Closed Cylinder = 27.1cc 450mm(min) 580mm(max) barrel length 2. XM Cylinder = "4/5 hole" = 364mm(min) 460mm(max) barrel length 3. M4 Cylinder = "3/4 hole" aka Type-2 17cc - 229mm(min) 430mm(max) barrel length 4. MP5K Cylinder = "mid hole" 9cc 110mm(min) 170mm(max) barrel length Systema NB Standard and BoreUp Parts: 1. Type-0 Cylinder (closed) fits M16-A1,VN,A2,G3-A4,SG1,SIG550,AUG 2. Type-1 Cylinder (tip hole) for XM177, M4, AK47, AK47S, SIG551 3. Type-2 Cylinder (XM hole) for MP5-A4,A5,SD5,SD6, MC51,SIG552 4. Type-3 Cylinder (M4 "3/4" hole) for MP5 PDW 5. Type-4 Cylinder (MP5K mid hole) for MP5K *BoreUp Closed 29.4cc = 500mm(min) 600mm(max) barrel length KM Cylinder Parts: *Intercept Cylinder 59 barrel length from 450mm to 590mm (Type 0) *Intercept Cylinder 45 barrel length from 250mm to 450mm (Type 2) *Intercept Cylinder 25 barrel length from 100mm to 250mm (Mid-hole) *To avoid confusion, don't mix brand model names, just model equivalence *TM M733 by stock is closed cylinder (Type 0) -over ratio BARREL: (inner barrel length) 650mm/25.59in PSG-1 (extended) 595mm/23.42in APS2 OR 589mm/23.18in PSG-1 550mm/21.65in M16A1/VN/A2,AUG (extended) 534mm/21.02in Sig550 509mm/20.03in M16A1/VN/A2,AUG 472mm/18.58in Famas SV/F1 469mm/18.46in G3-A3/A4,SG1 455mm/17.91in AK47,AK47s 444mm/17.48in M60 407mm/16.02in M4A1 M653E2 (extended) 395mm/15.55in APS2 SV 369mm/14.52in HK51 363mm/14.29in M4A1,RIS,SR-16,XM177ED,Sig551 300mm/11.81in M1A1,AKBetaSpetz, M733 285mm/11.22in MC51 247mm/9.72in Car15,P90,G36C, SIG552 245mm/9.64in UZI - 400mm/15.74in (extended) 229mm/9.01in MP5A5/A4/SD5/SD6 170mm/6.69in MP5K-PDW (extended) 141mm/5.55in MP5K-PDW 110mm/4.33in MP5K |
|
| Autor: | Ramon [ 16/1/2012, 15:15 ] |
| Betreff des Beitrags: | Re: Zylinder vs. Lauflänge / Länge des Laufs pro Gun |
http://arniesairsoft.co.uk/?filnavn=/ar ... ticles.htm Unter Technical Articels findet man so ziemlich alles was man wissen will. |
|
| Seite 1 von 1 | Alle Zeiten sind UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|